› Virtual design laboratory for sustainable fiber reinforced concrete structures: From discrete fibers to structural optimization under uncertainty - Günther Meschke, Institute for Structural Mechanics, Ruhr-University Bochum
09:30-09:55 (25min)
› Deterioration mechanism of dam concrete caused by alkali-aggregate reaction: a numerical investigation based on meso-scale modeling - Jianwen Pan, Tsinghua University (remotely)
09:55-10:20 (25min)
› Life time extension of wind tower foundations via numerical predictions - Marco Di Prisco, Department of Civil and Environmental Engineering, Politecnico di Milano
10:50-11:15 (25min)
› The influence of autogenous shrinkage and creep on the risk of early age cracking - Erik Schlangen, Delft University of Technology
11:15-11:40 (25min)
› Digital twin for modelling of structural durability - Jan Cervenka, Cervenka Consulting s.r.o., Cervenka consulting
11:40-12:05 (25min)
› Integrating Hybrid Reinforced Concrete Technology and Advanced FEM-Based Numerical Modelling for Crack Control in Long Concrete Foundations without Joints - Joaquim Barros, University of Minho
14:30-14:55 (25min)
› Numerical modeling of new conceptions of 3D printed concrete structures for Pumped Storage Hydropower - Eduardo Fairbairn, COPPE - Instituto Alberto Luiz Coimbra de Pós-Graduação e Pesquisa de Engenharia
14:55-15:20 (25min)
› Predicting early age temperature evolution in massive structures from non-standard characterization test - Arnaud Delaplace, Holcim Innovation Center
15:20-15:35 (15min)
› Bayesian Inverse Modelling of Early-Age Stress Evolution in GGBFS Concrete Due to Autogenous Deformation and Aging Creep - Minfei Liang, Delft University of Technology
15:35-15:50 (15min)
› Modeling of the behavior of concrete specimens under uniaxial tensile stresses through the use of a 3D probabilistic semi-explicit model - Mariane R Rita, Universidade Federal do Rio de Janeiro (remotely)
15:50-16:05 (15min)
› Numerical simulation of concrete fracture by means of a 3D probabilistic explicit cracking model - Magno Mota, Universidade Federal do Rio de Janeiro (remotely)
16:35-16:50 (15min)
› Numerical modeling of 3D concrete printing wall structure to reliably estimate the failure mechanisms -
16:50-17:05 (15min)
› Biaxial Interaction Diagrams of a RC Section at Elevated Temperature -
17:05-17:20 (15min)
› Numerical Analysis of shear wall elements and calibration with testing results -
17:20-17:35 (15min)
› Computational performance assessment and failure analysis of reinforced concrete wall buildings under seismic loads - Ioannis Koutromanos, Virginia Tech. (remotely)
17:40-18:05 (25min)