› Contribution of rib-scale modelling to study the bond mechanisms of reinforcement in UHPFRC - Bruno Massicotte, Polytechnique Montréal
10:30-11:00 (30min)
› Relevance of behavior laws of homogenized reinforced concrete in the context of finite elements of different sizes - Alain Sellier, LMDC, Université de Toulouse, INSA/UPS Génie Civil, 135 Avenue de Rangueil, 31077 Toulouse cedex 04
11:00-11:25 (25min)
› Numerical Model for Explosive Spalling of High-Strength Concrete and Carbonation during and after Fire Exposure - Keitai Iwama, Yokohama National University
11:25-11:50 (25min)
› Multi-physical simulation of concrete hydraulic facilities affected by alkali-aggregate reaction: from material to structure - Mahdi Ben Ftima, École Polytechnique de Montréal
11:50-12:15 (25min)
› Design Optimization of Concrete Railway Tracks by Using Non-Linear Finite Element Analysis - Jean-Louis Tailhan, Université Gustave Eiffel
12:15-12:40 (25min)
› Fuzzy logic-based approach for the uncertainty modelling in cementitious materials - Philipp Kunz,Technische Universität Dresden = Dresden University of Technology (remotely), Antonio Cibelli, Politecnico di Milano [Milan]
14:40-14:55 (15min)
› Modelling the nonlinear seismic performance of bridge piers -
14:55-15:10 (15min)
› Long term prediction of the delayed behavior of concrete structures – The case of the Vercors mock-up of a nuclear containment -
15:10-15:25 (15min)
› Numerical and Experimental Evaluation of Multi-Ion Kinetics Associated with Macro-Cell Corrosion by Pseudo-Concrete -
15:25-15:40 (15min)
› Numerical and experimental investigation of wall effect in concrete - Takwa sayari, Fire Test Center of CERIB (Centre d'Etude et de Recherche de l'Industrie de Béton), Epernon, Université Paris-Saclay, ENS Paris-Saclay, CNRS, LMT - Laboratoire de Mécanique et Technologie, 91190, Gif-sur-Yvette
15:40-15:55 (15min)
› Numerical modeling of water transport in Ultra-High-Performance Fiber-Reinforced Concrete - David Conciatori, Université Laval
16:30-16:45 (15min)
› Modeling C-S-H sorption at the molecular scale: effective interactions, stability and cavitation - Fatima masara, Ecole Normale Supérieure Paris-Saclay
16:45-17:00 (15min)
› Artificial Neural Network-based methodology for optimization of low-cost green UHPFRC under ductility requirements - Joaquin Abellan-Garcia, Universidad del Norte
17:00-17:15 (15min)
› A Three-Dimensional Coupled Probabilistic Lattice Model Approach to Corrosion Induced Crack Modelling in Reinforced Concrete to Optimize for Sustainability - Melissa Zirps, Stanford University
17:15-17:30 (15min)
› Virtual design laboratory for sustainable fiber reinforced concrete structures: From discrete fibers to structural optimization under uncertainty - Günther Meschke, Institute for Structural Mechanics, Ruhr-University Bochum
09:30-09:55 (25min)
› Deterioration mechanism of dam concrete caused by alkali-aggregate reaction: a numerical investigation based on meso-scale modeling - Jianwen Pan, Tsinghua University (remotely)
09:55-10:20 (25min)
› Numerical approaches aimed at a sustainable design: the case of wind tower foundations - Marco Di Prisco, Department of Civil and Environmental Engineering, Politecnico di Milano
10:50-11:15 (25min)
› The influence of autogenous shrinkage and creep on the risk of early age cracking - Erik Schlangen, Delft University of Technology
11:15-11:40 (25min)
› Digital twin for modelling of structural durability - Jan Cervenka, Cervenka Consulting s.r.o., Cervenka consulting
11:40-12:05 (25min)
› Integrating Hybrid Reinforced Concrete Technology and Advanced FEM-Based Numerical Modelling for Crack Control in Long Concrete Foundations without Joints - Joaquim Barros, University of Minho
14:30-14:55 (25min)
› Numerical modeling of new conceptions of 3D printed concrete structures for Pumped Storage Hydropower - Eduardo Fairbairn, COPPE - Instituto Alberto Luiz Coimbra de Pós-Graduação e Pesquisa de Engenharia
14:55-15:20 (25min)
› Predicting early age temperature evolution in massive structures from non-standard characterization test - Arnaud Delaplace, Holcim Innovation Center
15:20-15:35 (15min)
› Bayesian Inverse Modelling of Early-Age Stress Evolution in GGBFS Concrete Due to Autogenous Deformation and Aging Creep - Minfei Liang, Delft University of Technology
15:35-15:50 (15min)
› Modeling of the behavior of concrete specimens under uniaxial tensile stresses through the use of a 3D probabilistic semi-explicit model - Mariane R Rita, Universidade Federal do Rio de Janeiro (remotely)
15:50-16:05 (15min)
› Numerical simulation of concrete fracture by means of a 3D probabilistic explicit cracking model - Magno Mota, Universidade Federal do Rio de Janeiro (remotely)
16:35-16:50 (15min)
› Numerical modeling of 3D concrete printing wall structure to reliably estimate the failure mechanisms -
16:50-17:05 (15min)
› Biaxial Interaction Diagrams of a RC Section at Elevated Temperature -
17:05-17:20 (15min)
› Numerical Analysis of shear wall elements and calibration with testing results -
17:20-17:35 (15min)
› Computational performance assessment and failure analysis of reinforced concrete wall buildings under seismic loads - Ioannis Koutromanos, Virginia Tech. (remotely)
17:40-18:05 (25min)
› Probabilistic modelling of containment building leakage at the structural scale: application to the PACE mock-up - Matthieu Briffaut, Laboratoire de Mécanique, Multiphysique, Multiéchelle
09:30-09:55 (25min)
› Incremental formulation of early age concrete in the finite strain range for the modelling of 3D concrete printing - Boumediene Nedjar, Université Gustave Eiffel
09:55-10:20 (25min)
› HPC Finite Element Solvers for Structural Scale Simulations Using Phase-Field Models for Fracture in Solids - Giuseppe Rastiello, Université Paris-Saclay, CEA, Service d'études mécaniques et thermiques, 91191, Gif-sur-Yvette, France
10:50-11:15 (25min)
› The role of modelling in structures operation or rehabilitation - Etienne Grimal, Electricité de France, Centre d'Ingénierie Hydraulique, EDF-CIH Technolac, 73290 La Motte Servolex, France - Olivier Chulliat, Electricité de France, Hydro Alpes, 38950 Saint-Martin-Le-Vinoux, France
11:15-11:40 (25min)
› Modelling of rock-shotcrete interfaces using a novel bolted cohesive element - Ali KARRECH, School of Civil, Environmental and Mining Engineering, The University of Western Australia
11:40-12:05 (25min)
› Permeability of damaged concrete, evaluation of the flow coefficient on the basis of multiscale computation - Christian La Borderie, Université de Pau et des Pays de l'Adour
12:05-12:30 (25min)
› The multi-scale multi-technique multi-physics framework required to model the thermal properties of cement-based materials - Tulio HONORIO DE FARIA, Ecole Normale Supérieure Paris-Saclay
14:30-14:45 (15min)
› Upgrading existing flat slabs and methods of calculation -
14:45-15:00 (15min)
› Numerical Simulations of CNT/CNF Reinforced Concrete Using ANSYS -
15:00-15:15 (15min)
› Development of a thermo-hydro-mechanical model of the containment vessel Vercors to study its aging and leak tightness, based on specimen tests and in situ measurements -
15:15-15:30 (15min)
› Toward a Material Agnostic Model of Microstructure Hydration and Deterioration in Concrete - Jeffrey Bullard, Texas A&M University. (remotely)
15:45-16:10 (25min)